Augers 

Augers
Call for pricing.  Download auger information

Some Coil or Sectional Flighting Uses

U Trough Conveyers
Conveyer Screws
Grain Augers
Mixers, TMR Mixers,
Snow Blowers
Dryers
Feed Bunks
Feed Mills
Grain Carts, Hopper Carts
Ice Augers,
Post Hole Diggers
Sludge and Waste Augers
Food Grade

Sectional Flighting comes in almost any size and thickness from 3” Diameter to 40” Diameter and thicknesses from 1/8” to 1 ½”

Coil Flighting can be Cupped or have the “Supper Edge”

When Ordering please Specify the following:

Out Side Diameter (OD) LETTER D IN THE DIAGRAM

Inside Diameter (Core) LETTER d IN THE DIAGRAM

Pitch (measured from one flight to the next) LETTER P IN THE DIAGRAM

Thickness (measured closest to the core)

Sectional or Coil

Coil is one continuous piece that is 5’ to 10’ long and will get thinner from the base to the edge

Sectional comes in sections about the same length as the pitch and will be the same thickness from the base to the edge.

This is VERY IMPORTANT!!!

LEFT HAND OR RIGHT HAND PLEASE LOOK AT THE PICTURE BELOW TO MAKE SURE YOU HAVE IT CORRECT.

Left Hand Flighting will coil around the core counter clockwise.

Right Hand Flighting will coil around the core CLOCKWISE

And finally the length or number of pcs.

LEFT HAND RIGHT HAND

 
-Weekend service
-CDL services
-No minimum bids
-Steel, aluminum welding

News

Jake O'Reilly earns MSHA trainer certificate

O'Reilly employees earn NCCCO Crane certifications

O'Reilly Fab awarded ductwork replacement in organic plant

O'Reilly Fab responds to emergency plant shutdown

O'Reilly Fab crane and rigging experience called to Spectro

O'Reilly's contracted for millwright, crane, rigging and metal fab